MCP3008.AfterReadInputs (METH) ¶ METHOD AfterReadInputs : INT InOut: Scope Name Type Return AfterReadInputs INT

MCP3008.BeforeWriteOutputs (METH) ¶ METHOD BeforeWriteOutputs : INT InOut: Scope Name Type Return BeforeWriteOutputs INT

MCP3008.Initialize (METH) ¶ METHOD Initialize : UDINT InOut: Scope Name Type Return Initialize UDINT Input wModuleType UINT dwInstance UDINT pConnector POINTER TO IoConfigConnector

SPI ¶ spi (FunctionBlock) connector AfterReadInputs (Method) BeforeWriteOutputs (Method) internal transfer (Method) transferExt (Method) status Operational (Property) spiMaster (FunctionBlock) Operational (Property) readwrite-commands transferExt (Method)

spi (FB) ¶ FUNCTION_BLOCK spi This function block is the base class for SPI devices controlled via the SPI device /dev/spidev0.0 . It is meant to be extended by other function blocks that overload the body and the following methods/properties and replace it with their specific implementation, always including a call of the base implementation with super^.<MethodName>() : body (general handling, start-up) AfterReadInputs (reading input data) BeforeWriteOutputs (writing output data) Initialize [optional] (used to read parameters from the configuration) Operational [optional] (used to signal the status of the device) The body of this FB is called by the methods AfterReadInputs and BeforeWriteOutputs, where _xAfterReadInputs indicates the caller. Use _iState to control your statemachine. A value of 10 by default indicates that the device is operational. Do not forget to call the base implementation with super^() , where the diagnosis indicators are set according to the Operational property. Properties: Operational Methods: AfterReadInputs BeforeWriteOutputs transfer transferExt Structure: connector AfterReadInputs (Method) BeforeWriteOutputs (Method) internal transfer (Method) transferExt (Method) status Operational (Property)

connector ¶ AfterReadInputs (Method) BeforeWriteOutputs (Method)

internal ¶ transfer (Method) transferExt (Method)

status ¶ Operational (Property)

spiMaster (FB) ¶ FUNCTION_BLOCK spiMaster This function block represents a spi master. InOut: Scope Name Type Comment Input _diMode DINT >0: SPI mode to be set; must be set before calling init(); after call of init() it contains the re-read value and can be used to check if the setting was correct _diBitsPerWord DINT >0: SPI bits per word; must be set before calling init(); after call of init() it contains the re-read value and can be used to check if the setting was correct _diMaxSpeed DINT >0: SPI max speed setting; must be set before calling init(); after call of init() it contains the re-read value and can be used to check if the setting was correct Properties: Operational Methods: transferExt Structure: Operational (Property) readwrite-commands transferExt (Method)

spiMaster.Operational (PROP) ¶ PROPERTY Operational : BOOL This property has to return TRUE, when the master device is configured and running