Initial Comment CHECK 0 [...] block with MODE=0

checked. Index DINT 0 [...] submodule. Range [0

Offset = 0 the set values [...] Offset must be between 0

_ERROR 16#0 No error [...] #8056-0xFFFF (Server)

installed, this can be 0 [...] 0. In this case [...] structure may be 0 along

[µs], 0: No [...] BACnet.IEC_BACNET_ADDRESS 0 Optional : The [...] structure. iState DINT 0

meaning of fTime=0, i [...] belt, fTime=0 is the [...] Time=0, the position

. VelFactors ARRAY [0 [...] Factors ARRAY [0..(SMC [...] Factors ARRAY [0..(SMC

StatesImmediateDisabling DWORD 0 Only relevant [...] . Bit 0: Normal [...] PostHomingWait UINT 0 Number of

0 according to [...] 0 immediately. b [...] the velocity is 0