Segment.ClassID OR LogicalFormat.Byte [...] According to CIP Vol 1 a [...] bit format e

MilliSec_low : BYTE; byMilliSec_high : BYTE; byMinuten : BYTE := 16#80

a byte, InOut: Name Type x0 BIT x1 BIT x2 BIT x3 BIT x

Address POINTER TO BYTE The [...] A bit mask to the [...] usiBitOffset USINT

7: toggle-bit to check [...] to transfer the [...] LastReceivedCounter USINT Bit0-6

Latch0Control BYTE register 0x9a8 for latch 0: bit 0 positive edge, bit 1

AddrValue POINTER TO BYTE pAddrWriteCopy POINTER TO BYTE di [...] DataItemAccess bSwap BOOL btBit

Checksum BYTE Bit 1 [...] Message BYTE 0 = ‘3’, 1 [...] Counter INT byFlags BYTE

TO BYTE Pointer to [...] reset to their [...] address to access the

a pointer to this [...] members use the bit [...] Identifier bit. Use