SMC_CAMTable_LREAL_256_2 (STRUCT) ¶ TYPE SMC_CAMTable_LREAL_256_2 : STRUCT This STRUCT represents a non equidistant curve table. The table can handle 256 elements of type LREAL . Note For information about technical and table units please see the documentation of SMC_CAMTable_LREAL_128_2 . InOut: Name Type Comment Table ARRAY [0..255] OF ARRAY [0..1] OF LREAL Array of master/slave position pairs in table units. Index 0 refers to the master, index 1 to the slave. The master values in the array must be filled in ascending order and must start with the master start position and end with the master end position. For each master value, the corresponding slave value must be set. fEditorMasterMin REAL The minimum master value in technical units. fEditorMasterMax REAL The maximum master value in technical units. fEditorSlaveMin REAL The minimum slave value in technical units. fEditorSlaveMax REAL The maximum slave value in technical units. fTableMasterMin REAL The minimum master value in table units. fTableMasterMax REAL The maximum master value in table units. fTableSlaveMin REAL The minimum slave value in table units. fTableSlaveMax REAL The maximum slave value in table units.

SMC_CAMTable_REAL_128_1 (STRUCT) ¶ TYPE SMC_CAMTable_REAL_128_1 : STRUCT This STRUCT represents an equidistant curve table. The table can handle 128 elements of type REAL . Note For information about technical and table units please see the documentation of SMC_CAMTable_LREAL_128_1 . InOut: Name Type Comment Table ARRAY [0..127] OF REAL Array of slave positions in table units. The array must start with the slave position related to the master start position and end with the slave position related to the master end position (see xStart and xEnd of MC_CAM_REF ). fEditorMasterMin REAL The minimum master value in technical units. fEditorMasterMax REAL The maximum master value in technical units. fEditorSlaveMin REAL The minimum slave value in technical units. fEditorSlaveMax REAL The maximum slave value in technical units. fTableMasterMin REAL The minimum master value in table units. fTableMasterMax REAL The maximum master value in table units. fTableSlaveMin REAL The minimum slave value in table units. fTableSlaveMax REAL The maximum slave value in table units.

SMC_CAMTable_REAL_128_2 (STRUCT) ¶ TYPE SMC_CAMTable_REAL_128_2 : STRUCT This STRUCT represents a non equidistant curve table. The table can handle 128 elements of type REAL . Note For information about technical and table units please see the documentation of SMC_CAMTable_LREAL_128_2 . InOut: Name Type Comment Table ARRAY [0..127] OF ARRAY [0..1] OF REAL Array of master/slave position pairs in table units. Index 0 refers to the master, index 1 to the slave. The master values in the array must be filled in ascending order and must start with the master start position and end with the master end position. For each master value, the corresponding slave value must be set. fEditorMasterMin REAL The minimum master value in technical units. fEditorMasterMax REAL The maximum master value in technical units. fEditorSlaveMin REAL The minimum slave value in technical units. fEditorSlaveMax REAL The maximum slave value in technical units. fTableMasterMin REAL The minimum master value in table units. fTableMasterMax REAL The maximum master value in table units. fTableSlaveMin REAL The minimum slave value in table units. fTableSlaveMax REAL The maximum slave value in table units.

SMC_CAMTable_REAL_256_1 (STRUCT) ¶ TYPE SMC_CAMTable_REAL_256_1 : STRUCT This STRUCT represents an equidistant curve table. The table can handle 256 elements of type REAL . Note For information about technical and table units please see the documentation of SMC_CAMTable_LREAL_128_1 . InOut: Name Type Comment Table ARRAY [0..255] OF REAL Array of slave positions in table units. The array must start with the slave position related to the master start position and end with the slave position related to the master end position (see xStart and xEnd of MC_CAM_REF ). fEditorMasterMin REAL The minimum master value in technical units. fEditorMasterMax REAL The maximum master value in technical units. fEditorSlaveMin REAL The minimum slave value in technical units. fEditorSlaveMax REAL The maximum slave value in technical units. fTableMasterMin REAL The minimum master value in table units. fTableMasterMax REAL The maximum master value in table units. fTableSlaveMin REAL The minimum slave value in table units. fTableSlaveMax REAL The maximum slave value in table units.

SMC_CAMTable_REAL_256_2 (STRUCT) ¶ TYPE SMC_CAMTable_REAL_256_2 : STRUCT This STRUCT represents a non equidistant curve table. The table can handle 256 elements of type REAL . Note For information about technical and table units please see the documentation of SMC_CAMTable_LREAL_128_2 . InOut: Name Type Comment Table ARRAY [0..255] OF ARRAY [0..1] OF REAL Array of master/slave position pairs in table units. Index 0 refers to the master, index 1 to the slave. The master values in the array must be filled in ascending order and must start with the master start position and end with the master end position. For each master value, the corresponding slave value must be set. fEditorMasterMin REAL The minimum master value in technical units. fEditorMasterMax REAL The maximum master value in technical units. fEditorSlaveMin REAL The minimum slave value in technical units. fEditorSlaveMax REAL The maximum slave value in technical units. fTableMasterMin REAL The minimum master value in table units. fTableMasterMax REAL The maximum master value in table units. fTableSlaveMin REAL The minimum slave value in table units. fTableSlaveMax REAL The maximum slave value in table units.

SMC_CAMTable_UDINT_128_1 (STRUCT) ¶ TYPE SMC_CAMTable_UDINT_128_1 : STRUCT This STRUCT represents an equidistant curve table. The table can handle 128 elements of type UDINT . Note For information about technical and table units please see the documentation of SMC_CAMTable_LREAL_128_1 . InOut: Name Type Comment Table ARRAY [0..127] OF UDINT Array of slave positions in table units. The array must start with the slave position related to the master start position and end with the slave position related to the master end position (see xStart and xEnd of MC_CAM_REF ). fEditorMasterMin REAL The minimum master value in technical units. fEditorMasterMax REAL The maximum master value in technical units. fEditorSlaveMin REAL The minimum slave value in technical units. fEditorSlaveMax REAL The maximum slave value in technical units. fTableMasterMin REAL The minimum master value in table units. fTableMasterMax REAL The maximum master value in table units. fTableSlaveMin REAL The minimum slave value in table units. fTableSlaveMax REAL The maximum slave value in table units.

SMC_CAMTable_UDINT_128_2 (STRUCT) ¶ TYPE SMC_CAMTable_UDINT_128_2 : STRUCT This STRUCT represents a non equidistant curve table. The table can handle 128 elements of type UDINT . Note For information about technical and table units please see the documentation of SMC_CAMTable_LREAL_128_2 . InOut: Name Type Comment Table ARRAY [0..127] OF ARRAY [0..1] OF UDINT Array of master/slave position pairs in table units. Index 0 refers to the master, index 1 to the slave. The master values in the array must be filled in ascending order and must start with the master start position and end with the master end position. For each master value, the corresponding slave value must be set. fEditorMasterMin REAL The minimum master value in technical units. fEditorMasterMax REAL The maximum master value in technical units. fEditorSlaveMin REAL The minimum slave value in technical units. fEditorSlaveMax REAL The maximum slave value in technical units. fTableMasterMin REAL The minimum master value in table units. fTableMasterMax REAL The maximum master value in table units. fTableSlaveMin REAL The minimum slave value in table units. fTableSlaveMax REAL The maximum slave value in table units.

SMC_CAMTable_UDINT_256_1 (STRUCT) ¶ TYPE SMC_CAMTable_UDINT_256_1 : STRUCT This STRUCT represents an equidistant curve table. The table can handle 256 elements of type UDINT . Note For information about technical and table units please see the documentation of SMC_CAMTable_LREAL_128_1 . InOut: Name Type Comment Table ARRAY [0..255] OF UDINT Array of slave positions in table units. The array must start with the slave position related to the master start position and end with the slave position related to the master end position (see xStart and xEnd of MC_CAM_REF ). fEditorMasterMin REAL The minimum master value in technical units. fEditorMasterMax REAL The maximum master value in technical units. fEditorSlaveMin REAL The minimum slave value in technical units. fEditorSlaveMax REAL The maximum slave value in technical units. fTableMasterMin REAL The minimum master value in table units. fTableMasterMax REAL The maximum master value in table units. fTableSlaveMin REAL The minimum slave value in table units. fTableSlaveMax REAL The maximum slave value in table units.

SMC_CAMTable_UDINT_256_2 (STRUCT) ¶ TYPE SMC_CAMTable_UDINT_256_2 : STRUCT This STRUCT represents a non equidistant curve table. The table can handle 256 elements of type UDINT . Note For information about technical and table units please see the documentation of SMC_CAMTable_LREAL_128_2 . InOut: Name Type Comment Table ARRAY [0..255] OF ARRAY [0..1] OF UDINT Array of master/slave position pairs in table units. Index 0 refers to the master, index 1 to the slave. The master values in the array must be filled in ascending order and must start with the master start position and end with the master end position. For each master value, the corresponding slave value must be set. fEditorMasterMin REAL The minimum master value in technical units. fEditorMasterMax REAL The maximum master value in technical units. fEditorSlaveMin REAL The minimum slave value in technical units. fEditorSlaveMax REAL The maximum slave value in technical units. fTableMasterMin REAL The minimum master value in table units. fTableMasterMax REAL The maximum master value in table units. fTableSlaveMin REAL The minimum slave value in table units. fTableSlaveMax REAL The maximum slave value in table units.

SMC_CAMTable_UINT_128_1 (STRUCT) ¶ TYPE SMC_CAMTable_UINT_128_1 : STRUCT This STRUCT represents an equidistant curve table. The table can handle 128 elements of type UINT . Note For information about technical and table units please see the documentation of SMC_CAMTable_LREAL_128_1 . InOut: Name Type Comment Table ARRAY [0..127] OF UINT Array of slave positions in table units. The array must start with the slave position related to the master start position and end with the slave position related to the master end position (see xStart and xEnd of MC_CAM_REF ). fEditorMasterMin REAL The minimum master value in technical units. fEditorMasterMax REAL The maximum master value in technical units. fEditorSlaveMin REAL The minimum slave value in technical units. fEditorSlaveMax REAL The maximum slave value in technical units. fTableMasterMin REAL The minimum master value in table units. fTableMasterMax REAL The maximum master value in table units. fTableSlaveMin REAL The minimum slave value in table units. fTableSlaveMax REAL The maximum slave value in table units.