Errors (0-255) and [...] NO_ERROR 0 Service [...] Code 0x20, which is

position. POS = 0 or POS [...] case Pos=0 . The [...] =0 is used, the

(dwTimeoutMs <> 0 [...] reading. Set to 0 for [...] reading. Has to be 0 if

Common.DeviceIterator ; deviceList : ARRAY [0 [...] Count := 0 ; devices

PresentContextList ARRAY [0..1] OF ty [...] { context-management (0 [...] { half-duplex (0) 9

0 Modbus Write [...] EOFDetectionTimeout UDINT 0

v0 and a (unit [...] [0..1] OF LREAL [...] intersection, that means v0

event dly ARRAY [0 [...] mly ARRAY [0..12 [...] yly ARRAY [0..20

ARRAY [0..31] OF ty [...] mly ARRAY [0..12 [...] yly ARRAY [0..20

. Priority 0 has a special [...] priority 0 are sent as [...] Driver , cobID := 16#0 , usi