to 0, if b [...] MaxAcceleration LREAL 0 Maximum [...] TimeAtMax DWORD 0 Maximum value

(with value in [0 [...] (with value in [0 [...] value in [0,1]) (for

(dwTimeoutMs <> 0 [...] writing. Set to 0 for [...] writing. Has to be 0 if

IEC61850_AT_TimeStamp phsABHar ARRAY [0 [...] IEC61850_AT_VECTOR phsBCHar ARRAY [0 [...] IEC61850_AT_VECTOR phsCAHar ARRAY [0

configuration (starting by 0 [...] 0, second CANbus

Common.IPParameterValue := ( IPAddress := [192, 168, 0 [...] := [255, 255, 255, 0 [...] _device.Enable := enable ; FOR i := 0 TO

byStopBits BYTE 0 [...] Parity BYTE 0 = NOPARITY, 1 [...] , example 5000 /0

[0,1]) (for [...] [0,1]) (for [...] value in [0,1]) (for

. POS = 0 or POS = 1 [...] the case P=0 . The [...] compatibility reasons. If P=0

Param1 DWORD 0 VisuStructEvent dwParam2 DWORD 0 [...] AddDataSize DWORD 0 only the